Do you need Ethernet in your home or office? There are a few ways in which you can set up this important connection process. However before you begin, you need to know which types of technology to use and how to set up your internet for bulletproof use!
The main ways to set up Ethernet - use a LAN cable and bulk network cables!
Let’s see the three main ways that you can set up Ethernet using a LAN cable and other bulk network cables to provide internet connection to your home or office!
Connect to the router
The first method of setting up Ethernet using bulk network cables is to connect to the router. The first step is to get an Ethernet cable, known as either a Cat5, Cat5e, or Cat6 cable with square plug at the end. The second step is ensuring your route is online and connected with your modem via a cable or Ethernet port in your wall.
Once your router is connected, locate the Ethernet ports on the computer and the router. The Ethernet ports will say LAN, while the other bulk network cables will be compatible with the other ports on the router. Once you have identified the correct ports, plug the Ethernet cable and the other bulk network cables into the router.
Configuring Ethernet on Windows
The second method of setting up Ethernet on your home computer or office computer is to configure the settings on Windows. The first step is to open the Start Menu and then click the Settings bar. Click on the Network and Internet button on the top row of the settings menu. Choose Ethernet and confirm the Ethernet setting is working. If you find the Ethernet is not working, you might have to inspect the bulk network cables to ensure everything is plugged in and the cables are in good condition.
Configure Ethernet settings on a Mac
The third way to set up Ethernet and internet on your home or office computer is to configure the settings on a Mac computer. The first step is to open the apple menu and click on the System Preferences bar. Click on Network and then select the Ethernet connection. Click on the Advanced button on the lower right hand corner of your screen.
Click on the TCP/IP tab and then confirm the Configure IPv4 box says Using DHCP. if the box does not say this, you will have to check the bulk network cables and the LAN cable to ensure everything is plugged into the router properly. If the cable is not working, click on Renew DHCP Lease and click OK.
Conclusion
Making sure your Ethernet is up and running using bulk network cables is key to providing internet connection and connectivity to your entire server. By figuring out the steps of how to install and confirm Ethernet is working on your device, whether it be a Windows or Mac computer, you can confirm the LAN cable is working properly and the bulk network cables are plugged into the correct spots on your router.
